
- Large Square
- Small Square
- Round
- Controls
- Preservative
- Accessories
- Brochures and Manuals
- Selection Guide
Applicators for Large Square Balers
The new HayBoss G2 600 Series Automatic Applicator system is now compatible with baler and tractor ISOBUS systems. By running through the baler monitor, the system is more efficient and easier to install and operate. The HayBoss G2 600 Automatic Applicator still retains all its functions such as sensing moisture and tonnage on the go, and adjusts the preservative application rate based on the condition of the hay. This precision gives the operator the exact amount of preservative required to keep the crop in great condition without wasting product. The display in the cab gives the operator complete control and provides information on:
- Moisture content
- Speed of baling (tonnage)
- Volume of preservative used per bale
- Total tons baled
The HayBoss G2 600 Series Automatic Applicator is also compatible with the Bale Indentification System, or Tagger, as well as other add-on accessories to enhance your baling operation.
Electronic control systems are also available for large square balers. Equipped with a high-capacity 110-gallon tank mounted on the rear of the baler, the operator can go almost non-stop.
Moisture Sensors for Large Square Balers
Automatic systems for large square balers are equipped with two star wheel moisture sensors mounted on the top of the bale chute, sensing moisture across the width of the bale via conductivity. The sensors can accurately read crop moisture from 8% to 70%, covering a wide range of moisture levels. As the star wheels turn, they also calculate tonnage, helping the system apply preservative even more accurately
Star wheel sensors for large square balers
Product Specs
All applicators come as complete kits designed to fit your specific baler, and consist of:
- 110 gallon plastic tank
- 12 volt pumping system
- All plumbing and wiring supplied
- Control options: 600 Series Automatic or Electronic
Comparison of Applicator Controls |
||
Electronic Applicator | 600 Series Automatic | |
Single Pump System | X | |
3-Pump Manifold | X | |
Control Box with Adjustable Dial | X | |
iPad Display | X | |
IOSBUS Display | X | |
Built-in Flowmeter | X | |
Automatic Application | X | |
Moisture Sensing Capability | X | |
Job Records by Field | X | |
Job Records by Individual Bales | X | |
Calculates Baling Rate | X | |
Export Job Records to iPad | X | |
Hay Indicator Compatible | X | X |
Dye Sprayer Kit Compatible | X | |
Tagger Compatible | X |
Applicators for Small Square Balers
Get started baling earlier and bale longer with the addition of a preservative application system to your small square baler. Systems are available in 25-gallon or 55-gallon units and mount on the back frame, side of the baler, or top, depending on your model of baler. Choose between a new 300 series HayBoss automatic control system, a 600 series HayBoss G2 commercial automatic system, or an electronic or manual control system.
Sensors for Small Square Balers
![]() |
small square sensors HayBoss systems for small square balers are equipped with two star wheel moisture sensors mounted on the bottom of the bale chute. |
Product Specs
All applicators come as complete kits designed to fit your specific baler, and consist of:
- 55 gallon tank
- 12 volt pumping system
- All plumbing and wiring supplied
- Your choice of control options: 600 Series Automatic, new 300 Series Automatic, Electronic, or Manual
Comparison of Applicator Controls |
|||
Electronic Applicator | 300 Series Automatic | 600 Series Automatic | |
Single Pump System | X | X | |
3-Pump Manifold | X | ||
Control Box with Adjustable Dial | X | ||
iPad Display | X | X | |
IOSBUS Display | X | ||
Built-in Flowmeter | X | X | |
Automatic Application | X | X | |
Moisture Sensing Capability | X | X | |
Job Records by Field | X | X | |
Job Records by Individual Bales | X | ||
Calculates Baling Rate: Round Baler | X | ||
Calculates Baling Rate: Small Square Baler, Large Square Baler | X | X | |
Export Job Records to iPad | X | ||
Hay Indicator Compatible | X | X | X |
Stroke Counter on Small Square Baler | X | ||
Dye Sprayer Kit Compatible: Small Square Baler, Large Square Baler | X | ||
Tagger Compatible: Large Square Baler | X |
Applicators for Round Balers
Hay preservative can be used to bale large round bales between 16% and 30% moisture. You have the option of a 25-gallon or, on certain models, a 55-gallon application system. The system mounts to the tongue of the baler and holds enough preservative to treat 30 to 60 tons of hay. Depending on your need, choose the new 300 series HayBoss automatic system, a 600 series HayBoss G2 commercial automatic system, an electronic system, or an economical manual control system (available in 25-gallon only).
Moisture Sensors for Round Balers
Moisture discs for round balers
Product Specs
All applicators come as complete kits designed to fit your specific baler, and consist of:
- 25 or 55 gallon tank
- 12 volt pumping system
- All plumbing and wiring supplied
Your choice of control options: 600 Series Automatic, new 300 Series Automatic, Electronic, or Manual
Comparison of Applicator Controls |
|||
Electronic Applicator | 300 Series Automatic | 600 Series Automatic | |
Single Pump System | X | X | |
3-Pump Manifold | X | ||
Control Box with Adjustable Dial | X | ||
iPad Display | X | X | |
IOSBUS Display | X | ||
Built-in Flowmeter | X | X | |
Automatic Application | X | X | |
Moisture Sensing Capability | X | X | |
Job Records by Field | X | X | |
Job Records by Individual Bales | X | ||
Calculates Baling Rate: Round Baler | X | ||
Calculates Baling Rate: Small Square Baler, Large Square Baler | X | X | |
Export Job Records to iPad | X | ||
Hay Indicator Compatible | X | X | X |
Stroke Counter on Small Square Baler | X | ||
Dye Sprayer Kit Compatible: Small Square Baler, Large Square Baler | X | ||
Tagger Compatible: Large Square Baler | X |
600 Series Automatic Control System
Large Square Balers
The 600 HayBoss G2 Automatic Applicator control system is the premier applicator for large square balers. The 600 system accurately senses moisture on-the-go and adjusts the application of preservative every three seconds to match the condition of the hay. This precision gives the operator the exact amount of product required to keep the crop in great condition, without wasting product. The all new 600 automatic system for large square balers can be controlled through the baler ISOBUS display or iPad, giving complete control to the operator more efficiently as ever without the need for a separate monitor in the cab. The display shows moisture content, speed of baling, and how much preservative is being applied. This control adjusts application rate every three seconds to attain the target rate.
This kit can be controlled one of three ways:
- If the baler is ISOBUS compatible, the applicator can be integrated and displayed through the baler monitor in the cab- no other display is needed.
- If the operator has an ISOBUS tractor with a VT display and is not using it to control the baler, the applicator functions can be viewed through the tractor display.
- If the ISOBUS options are not available, a Bluetooth receiver can be used to display the applicator through an iPad.
A simple push on the Main Menu key pulls up a selection of other screens including the adjustable settings and a Job Record screen. The system stores up to 300 job records by field, including date and time of baling, number of tons baled, product used and the average moisture and high moisture. The system will also store up to 33,000 individual bale records within those job records, and all of the job records can be exported to the iPad, or downloaded and printed via a USB port on the processor for easy and efficient access to crucial bale information.
The new Dye Sprayer Marking Kit that is found on large square balers can now be used on small square balers, allowing the operator to visibly mark the wet bales. GPS systems and bale scale kits can also be used with the 600 Series Automatic Applicator, helping the baling operation become more advanced and efficient than ever before.
Round and Small Square Balers
The 600 HayBoss G2 Automatic Applicator is the choice of applicator for the round or small square operator that makes hay commercially or is looking for the added performance and capabilities of the 600 system. On small square balers, the 600 system reads the moisture and tonnage with two star wheel sensors, and also has a stroke counter that records the number of strokes per bale, and an end of bale sensor, to record individual bale information like the large square system does.
The 600 system on round balers reads moisture with two discs in the bale chamber up to 70% moisture, and also has a sensor on the bale door to record individual bale records. Both systems have the ability to store and download job and individual bale records via USB and export via iPad.
300 Series Automatic Control System
Round and Small Square Balers
The 300 series automatic control system is a more compact and efficient applicator that accurately senses moisture on the go and adjusts the application of preservative to match the condition of the hay. This precision give the operator the exact amount of product required to keep their crop in great condition, without wasting product. The 300 Series applicator is controlled with an iPad* through a Bluetooth receiver, eliminating harnesses in the cab.
New improvements to the 300 Series Automatic Applicator include:
- Single constant-pressure pump with pulsing solenoid that reacts quickly to changes in application rates
- Improved flowmeter that works on a range of products
- Smaller and more compact system that is easier to install and maintain
The applicator takes moisture and baling rate information from the two star wheel sensors on small square balers, and two moisture discs in the bale chamber on round balers, and the system will automatically apply the correct amount of product. The moisture, tonnage, and rates are all displayed on the screen, along with the volume used. A simple push of any Main Menu key pulls up a selection of other screens including adjustable settings and a Job Records screen. The system stores 63 jobs by date and time, number of tons baled, product used, and high and average moisture.
*iPad Mini or iPad 3rd Generation (2012) or newer, running the current iOS operating system or one previous version required for iPad option
Electronic Control Systems
The electronic cab control is a solid state electronic pump control used for large round and large square balers. The control is mounted in the cab or on the fender. Application rate is quickly and easily adjusted from the operator s seat. Once set, the electronic control will hold the application rate constant. This unit is included with all 25-and 55-gallon applicators with electronic control. It is also included with 100-gallon applicators with electronic control for large square balers.
Manual Control Systems
The manual pressure regulator provides full-rate adjustment at the applicator, which is controlled on the baler. This economical control is available for 25-gallon applicators only. *There is no regulation control in the cab of the tractor with this unit.
Your hay is important. Make sure your preservative does what it says it will.
AGCO Hay Preservative and Applicators
AGCO Hay Preservative Products Literature (French)
AGCO Precision Hay Production
MSDS for AGCO Buffered Acid Hay Preservative
Preservative Treated Hay for Horses
MANUALS:
600 and 300 Series Applicator kits DO NOT include display
600 and 300 Series Applicator kits will now include a Bluetooth receiver for iPad operation.
(iPad Mini or iPad 3rd Generation (2012) or newer, with iOS 8 or higher operating system required for iPad option)
*Contact Your Local AGCO Dealer For Pricing*
LARGE SQUARE BALERS - 110 GALLON APPLICATION SYSTEMS |
|||
Baler Model | HayBoss G2™
Automatic Applicator |
Electronic Control
Applicator |
Upgrade to
HayBossG2™ |
AGCO Balers | |||
7430 | HT6964494B | HT4914494 | HT6654494B |
7430 w/ RotoCut | HT6964500B | HT4914500 | HT6654500B |
7433, 7434 ,2150, 2170, 2190 | HT6964518B | HT4914518 | HT6654518B |
7433, 7434 ,2150, 2170, 2190 w/RotoCut | HT6964519B | HT4914519 | HT6654519B |
Challenger Balers | |||
LB 33 | HT6964494B | HT4914494 | HT6654494B |
LB 33 w/RotoCut | HT6964500B | HT4914500 | HT6654500B |
LB34 | HT6964492B | HT44914492 | HT6654492B |
LB34 w/RotoCut | HT6964501B | HT4914501 | HT6654501B |
LB33B, LB34B, LB34BXD, LB44B, 2250,
2270, 2270XD, 2290 |
HT6964518B | HT4914518 | HT6654518B |
LB33B, LB34B, 2250, 2270, 2290 w/RotoCut | HT6964519B | HT4914519 | HT6654519B |
LB33B, 2250 w/PackerCut | HT6964527B | HT4914527 | HT6654527B |
LB34B XD, 2270XD w/RotoCut | HT6964530B | HT4914530 | HT6654530B |
Hesston Balers | |||
4750, 4755 | HT6964490B | HT4914490 | HT6654490B |
4760 | HT6964494B | HT4914494 | HT6654494B |
4760 w/ RotoCut | HT6964500B | HT4914500 | HT6654500B |
4790 | HT6964492B | HT4914492 | HT6654492B |
4790 w/ RotoCut | HT6964501B | HT4914501 | HT6654501B |
4900, 4910 | HT6964491B | HT4914491 | HT6654491B |
Massey Ferguson Balers | |||
2050 | HT6964494B | HT4914494 | HT6654494B |
2050 w/RotoCut | HT6964500B | HT4914500 | HT6654500B |
2140, 2150, 2160, 2170, 2170XD, 2190, 2250,
2270, 2270XD, 2290 |
HT6964518B | HT4914518 | HT6654518B |
2140, 2150, 2160, 2170, 2190, 2250, 2270, 2290 w/RotoCut | HT6964519B | HT4914519 | HT6654519B |
2250, 2270, 2270XD w/ProCut | HT6964542B | HT4914542 | HT6654542B |
2150, 2250, w/PackerCut | HT6964527B | HT4914527 | HT6654527B |
2170XD, 2270XD, w/RotoCut | HT6964530B | HT4914530 | HT6654530B |
SMALL SQUARE - 55 GALLON APPLICATION SYSTEMS |
|||||
Baler Model | HayBoss G2™
Auto Applicator |
300 Series
Auto Applicator |
Electronic Control
Applicator |
Manual Control
Applicator |
Upgrade to
300 Automatic |
AGCO Balers | |||||
7105, 7110, 7115, 7120 | HT6504485B | HT3444416C | HT4344416 | HT4324416 | HT3U44416C |
1835, 1837, 1839, 1841 | HT6444416B | HT3444416C | HT4344416 | HT4324416 | HT3U44416C |
1836, 1838, 1840, 1842 | HT6444416B | HT3444416C | HT4344416 | HT4324416 | HT3U44416C |
1843N, 1843S | HT6504502B | HT3504502C | HT4484502 | N/A | HT3U04502C |
1844N, 1844S | HT6504485B | HT3504485C | HT4484485 | N/A | HT3U04485C |
Challenger Balers | |||||
SB 34, 36, 44 | HT6504485B | HT3504485C | HT4484485 | HT4384485 | HT3U04485C |
ROUND BALERS - 25 GALLON APPLICATION SYSTEMS |
||||
Baler Model | 300 Series
Auto Applicator |
Electronic Control
Applicator |
Manual Control
Applicator |
Upgrade to 300 Automatic |
AGCO Balers | ||||
5134, 5145 | HT3464484C | HT4414484 | HT4394484 | HT3U64484C |
Challenger Balers | ||||
RB 34, 44, 45, 42 | HT3464484C | HT4414484 | HT4394484 | HT3U64484C |
Hesston Balers | ||||
500 Series: 530, 540, 545, 550,
555S, 555T, 560, 565A, 565T |
HT3464484C | HT4414484 | HT4394484 | HT3U64484C |
814 Fixed Chamber | HT4414484 | HT4394484 | ||
Massey Ferguson Balers | ||||
1734, 175, 1746, 1756 | HT3464484C | HT4414484 | HT4394484 | HT3U64484C |
ROUND BALERS - 55 GALLON APPLICATION SYSTEMS |
||||
Baler Model | HayBoss G2™ Auto Applicator | 300 Series Auto Applicator | Electronic Control Applicator | Upgrade to 300 Automatic |
AGCO Balers | ||||
5446, 5446 Silage, 5456, 5545, 5545 Silage,
5546, 5546 Silage, 5556, 5556 Silage, 2745, 2746, 2746A, 2756A, 2766 |
HT6494508B | HT3494508C | HT4484508 | HT3U94508C |
2846, 2846A, 2856, 2856A, 2946, 2946A,
2956, 2956A |
HT6494524B | HT3494524C | HT4484524 | HT3U94524C |
Challenger Balers | ||||
RB453, 453A, 463, 463A, 563, 563A,
RB56C, RB56CA |
HT6494524B | HT3494524C | HT4484524 | HT3U94524C |
Hesston Balers | ||||
800 Series - 845, 846A, 855, 856 | HT6494508B | HT3494508C | HT4484508 | HT3U94508C |
900 Series - 946, 955, 956 | HT6494508B | HT3494508C | HT4484508 | HT3U94508C |
Massey Ferguson Balers | ||||
2745, 2746, 2746A, 2756A, 2766 | HT6494508B | HT3494508C | HT4484508 | HT3U94508C |
2846, 2846A, 2856, 2856A,
2946, 2946A, 2956, 2956A |
HT6494524B | HT3494524C | HT4484524 | HT3U94524C |
MOISTURE ONLY SYSTEMS |
||
Baler Style | 600 Series Moisture Only | Upgrade to Auto Applicator |
Small Square | HT600SS | Contact Harvest Tec |
Round Baler | HT600RB | Contact Harvest Tec |
Large Square | HT600A | Contact Harvest Tec |
Accessories |
|
Description | Part Number |
400 Series iPad Conversion Kit (Bluetooth receiver) | HT4672A |
600 Series iPad Conversion Kit (Bluetooth receiver) | HT6672A |
iPad Mini Mounting Kit | HT2012MK |
iPad Mini & Mounting Kit Combo | HT4670DK |
Baler Mounted Moisture Tester | H8-FX2000 |
Hay Indicators (Crop-Eyes) | HT474A |
Dye Marking System | HT0840 |
RFV Dye Marking System | HT845RFV |
Microwave Moisture Kit (pre-compression chamber) | HT700MWM |
Microwave Moisture Kit (end of bale chamber) | HT701MWM |
12V Electronic Transfer Pump (4 Gal/Min) | HT9212 |
12V Electronic Transfer Pump (15 Gal/Min) | HT9214 |
110V Electronic Transfer Pump (4 Gal/Min) | HT9215 |