John Deere Forage Harvester

Pull-Type Forage Harvester

jd_forage_manualThe 55-gallon system can be used to lubricate the blower band on pull-type forage harvesters when harvesting alfalfa silage. Or, in can be used to apply inoculant on any crop. Harvest Tec has developed a blower band lubricator nozzle that places water on the implements blower housing, reducing horsepower requirements and increasing efficiency in crop flow.

SPECIFICATIONS:

  • 55-gallon plastic tank
  • Steel frame clamps to implement s tongue
  • 12 volt bypass pump
    (regulation by changing tips)
  • All required plumbing & electrical components are included

Self-Propelled Forage Harvester

jd_forage_propThe 90 gallon system for John Deere s self-propelled forage harvesters can be used to keep the knives and blower lubricated with water when harvesting alfalfa silage. Or, the system can be used to apply crop preservative or inoculants when harvesting any crop. Harvest Tec has worked with John Deere to integrate the system into the 7000 series harvesters. The 676 will turn on and off automatically with the engagement of the intake rolls on the harvester.

SPECIFICATIONS:

  • 90-gallon plastic tank
  • 12-volt electric pump
  • All required plumbing & electrical components are included

Accessories

jd_acc_moisturePart# 476
For Self-Propelled Forage Harvesters.
The Harvest Tec Model 476 gives the operator a continuous read-out of the crop being harvested. Two unique sensors are located in the transition above
the machine s blower. As the crop passes over the sensors the moisture content is calibrated based on the electrical conductivity between the top and bottom sensor.

  • Selectable calibration for hay silage or corn silage
  • Reads between 37% and 80% moisture content
  • Accuracy: Load Average
    • Hay Silage ± 2%
    • Corn Silage ± 3%
  • A load average is displayed when the load average button is pushed on the monitor (or with a remote switch)
  • Both averages can be reset at any time (by load or by field)
  • A field average can also be displayed when the load average button is pushed and held

Selection Guide

Pull-Type Forage Harvesters - 55 Gallon Sprayer Systems

Harvester Model Part #
3955 655
3975 655
3950 655
3970 655
All Other JD Pull-Types 655

Self-Propelled Forage Harvesters - 100 Gallon Sprayer Systems

Harvester Model Part # Install Kit #
6000 Series 675 6704

Self-Propelled Forage Harvesters - 90 Gallon Sprayer Systems

Harvester Model Part #
7000 Series 676